Danfoss VLT Advanced Harmonic Filter AHF 005 Projektierungshandbuch Seite 77

Spezifikationen
PE M8 (15Nm)
62.8±1.0 mm [2.5±0.04 in]
9.0±2.5 mm [0.4±0.10 in]
Abbildung 7.18 IP20 X5-V3 Interner Lüfter
X1 Mains 50mm (5Nm)
X2 Drive 50mm (5Nm)
Abbildung 7.19 IP20 X5-V3 Interner Lüfter, Klemmenbezeichnung und 3D-Ansicht
M0010801
Projektierungshandbuch
597.0±2.5 mm [23.5±0.10 in]
210.5±1.0 mm [8.3±0.04 in]
240.0±1.0 mm [9.4±0.04 in]
685.0±2.5 mm [27.0±0.10 in]
735.8±2.5 mm [29.0±0.10 in]
X3/X4 Capacitor disconnect 16mm (3.5Nm)
A/B Temperature 2.5mm (0.8Nm)
Danfoss A/S © 05/2019 Alle Rechte vorbehalten.
210.5±1.0 mm [8.3±0.04 in]
9.0±2.5 mm [0.4±0.10 in]
370.0±1.0 mm [14.6±0.04 in]
418.0±2.5 mm [16.5±0.10 in]
8 holes must be used to fix the AHF
with M8 screws
7 7
75