Herunterladen Inhalt Inhalt Diese Seite drucken
TMI VD33 Gebrauchsanleitung
Vorschau ausblenden Andere Handbücher für VD33:
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
[ VD33 ]
hour hand
dual hour
hand (12 hr)
second hand
dual minute
date window
hand
Local Time Time Indication
Time setting
(by turning CROWN)
Dual Time
Time Indication
Time setting
(by pushing BUTTONS)
Note : The dual minute hand rotates one revolution at every quarter (15 minutes). There is no problem as
it is typical function of the movement.
* After setting or changing the battery, before setting the time, check if the dual hour hand and dual
minute hand are at the "0" (12 o'clock) position.
* If either the dual hour hand or the dual minute hand is not at the "0" position, reset it/them following
the procedure shown below :
1) Pull out the crown to second click (VD33) / first click (VD34)
2) Keep the buttons A & B pressed at the same time for more than 2 seconds, then release the buttons.
* Dual minute hand moves and returns to where it was
Operation Manual
VD33 / VD34
DISPLAY AND CROWN/ BUTTON OPERATION
minute hand
Button A
1st click
2nd click
Crown at normal
position
Button B
24 hour hand
Hour hand
Minute hand
Second hand
24 hour hand
Date window
Crown at :
1st click
2nd click
Dual hour hand
Dual minute hand
Crown at :
Normal position
2nd click (VD33)
1st click (VD34)
ADJUSTING DUAL TIME HANDS POSITION
[ VD34 ]
hour hand
minute hand
dual hour
hand (12 hr)
second hand
dual minute
hand
VD33
Center second hand
O
Date setting
Time setting
9H subdial hand (12 hr)
Button A : -1 hour / push
Button B : +1 hour / push
Button A : -1 minute / push
Button B : +1 minute / push
Button A
1st click
Crown at normal
position
Button B
24 hour hand
VD34
Center hour hand
Center minute hand
3H subdial hand
X
Time setting
X
6H subdial hand
English
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für TMI VD33

  • Seite 10 * Wenn sich weder der zweite Stundenzeiger noch der zweite Minutenzeiger oder einer der beiden nicht an der 0-Position befindet, setzen Sie ihn/beide mit dem folgenden Verfahren zurück: 1) Ziehen Sie die Krone zwei Klicks heraus (VD33) / erster Klick (VD34)
  • Seite 11: Einstellen Der Ortszeit

    Funktion des Uhrwerks darstellt. EINSTELLEN DER ORTSZEIT 1) Ziehen Sie die Krone zwei Klicks heraus (VD33) / erster Klick (VD34), wenn sich der Sekundenzeiger an der 12-Uhr-Position befindet. 2) Drehen Sie die Krone zum Einstellen des Stunden- und Minutenzeigers (stellen Sie sicher, dass der 24-Stundenzeiger korrekt eingestellt ist).
  • Seite 12 German Gebrauchsanleitung VD33 / VD34 3) Drücken Sie die Krone zurück in die Ausgangsposition entsprechend dem Zeitsignal. Hinweis : Der zweite Minutenzeiger macht eine Umdrehung alle 15 Minuten. Das ist kein Problem, da dies die normale Funktion des Uhrwerks darstellt.

Diese Anleitung auch für:

Vd34

Inhaltsverzeichnis