MADRIX NEBULA Kurzanleitung & Technisches Handbuch Seite 9

Connection Diagram Variations
You can connect your LEDs, MADRIX
ways. The following pages show the different variations as connection diagrams.
These schemes are to be seen independently of the direction, position, and
mounting method. Variation A1 to Variation D refer to the data connection over
network. Variation X1 to Variation Z refer to the data connection over USB.
Please see page 6 and page 7 for further information.
SUPPLY POWER TO NEBULA ONLY ONCE! DO NOT CONNECT V+
MULTIPLE TIMES BY CONNECTING IT VIA PORT 1/2 AND POWER.
Legend
How To Connect Multiple LEDs
When your power supply provides power for multiple LED stripes, for example:
GROUND
V+
When your power supply only provides power for 1 LED stripe, for example:
GROUND
V+
Power
Supply
®
Connection required for GROUND / DATA.
Connection possible for CLOCK if needed.
Connection required for V+.
Represents single LEDs or multiple LED stripes / LED strips
/ LED tape up to the maximum possible amount per port.
Represents as many power supplies as needed for the
amount of your LEDs. May represent a joint power supply
for several LED tapes or may represent several, seperate
power supplies for several LED tapes and ports. Please
mind the correct supply of power for your LEDs and their
correct direction as per their user manual!
Power
Supply
NEBULA, and data cables in different
Power
Supply
Data
Connection
To NEBULA
Data
Connection
To NEBULA
8
EN