MADRIX NEBULA Kurzanleitung & Technisches Handbuch Seite 13

Variation X2
Description: Power is supplied only once. It is supplied to NEBULA with 12 A max. and routed
through to all LEDs, which are connected to both ports via GROUND, DATA, possibly CLOCK, and
V+ with 6 A max. load for each port.
Variation Y2
Description: Power is supplied to NEBULA over USB and supplied separately to the LEDs
(as required). LEDs are connected to both ports via GROUND, DATA, and possibly CLOCK,
but not via V+!
Variation Z
Description: Power is supplied only once and it is only supplied to the first LEDs (as required)! LEDs
are connected to both ports via GROUND, DATA, possibly CLOCK, and V+ (6 A max.). The power
supply is connected between LEDs and NEBULA, due to the expected voltage drop over the length.
Alternative: You may connect the power supply at the end of the tape for LEDs that use > 9 V.
12
EN