Accessories; Washing Machine Installation; Removal Of The Packaging Material; Removal Of The Locking Screws - ECG EWF 1280 IDA+++ Bedienungsanleitung

5. Washing machine cabinet
6. Adjustable feet
Front panel and controls
GB
1
1. Programs switch
2. Display
3. Additional function buttons

Accessories

Operating manual

WASHING MACHINE INSTALLATION

Removal of the packaging material

Packaging material protects your washing machine during transportation. Packaging materials are
environmentally friendly and recyclable. Recycling saves raw material resources and protect the environment.

Removal of the locking screws

Before you start using the machine, it is ESSENTIAL
that you remove the locking screws at the rear of the
machine which protect the drum during transport.
Damage cause by starting the washing machine
with installed locking screws is not covered by the
warranty.
1. Use the wrench to loosen the locking screws by
turning them counterclockwise.
2. Remove the loosened locking screws.
3. Insert the supplied plastic plugs in the holes
from the locking screws.
4. Keep the locking screws for possible future transportation.
Before fi rst switching on, be sure to remove the base unit protection
on the underside of the washing machine when unpacking – see
fi gure. Operation with residues of packaging material may adversely
aff ect the functioning of the washing machine.
76
EWF 1280 IDA+++_manual_cz_sk_de_en.indb 76
2 3
Inlet hose
7. Drum
8. Drum door
Display
Plastic plugs (4 pcs) Spanner
Base unit protection
06.05.2019 17:41:36