Canon imageRUNNER serie Anwenderhandbuch Seite 66

Feeder (View from Above)
Place the
original
face up.
Vertical Placement
NOTE
•
If the top edge of the original is not aligned with the back edge of the platen glass (by the
arrow in the top left corner), your original may not be scanned correctly, depending on the
copy mode you have set.
•
A4 and A5 originals can be placed either vertically or horizontally. However, the scanning
speed for horizontally placed originals is somewhat slower than for vertically placed
originals. Place originals horizontally when printing with a preset copy ratio, such as
when enlarging an A4 or A5 original onto A3 paper. (See Chapter 1, "Basic Operations,"
in the Copying Guide.)
•
Horizontally placed A4 and A5 originals are referred to as A4R and A5R.
•
A3 originals must be placed horizontally.
•
To achieve the same output orientation using the optional feeder as when the original is
placed on the platen glass, place the original upside down and face up. However, if an
appropriate size of paper is not loaded for the Staple mode, the output is rotated
automatically.
Place the
original
face up.
Horizontal Placement
Placing Originals
2
2-7