Installation; Required Settings For Remote Scanning - Canon imageRUNNER serie Anwenderhandbuch

Installation

From the menu screen of the CD-ROM, you can begin installing the scanner driver,
or display the Network ScanGear Installation Guide. For details about the
installation procedure, see the Network ScanGear Installation Guide.
NOTE
View the Network ScanGear Installation Guide before you start the installation. You cannot
view the Network ScanGear Installation Guide while the installation is in progress.

Required Settings for Remote Scanning

Once you have installed the scanner driver, you need to select Color Network
ScanGear as a scanner to be used in order to perform remote scanning.
■ Selecting the Network Scanner You Want to Use
In order to scan using Color Network ScanGear, select the device on the network that you
want to use as a scanner using the ScanGear Tool. Because a scanner is not selected
immediately after installation, this operation must be performed before use.
NOTE
•
For details about the procedure, see the Network ScanGear Guide.
•
The ScanGear Tool is software that is installed together with Color Network ScanGear.
Before Using the Remote Scan Function
1
1-29