Belkin F5U508 Benutzerhandbuch Seite 10

P73954ec-A-F5U508-man.qxd 22-11-2002 15:41 Page 6
8. When Windows restarts, the PCI card will be detected and
Note: Depending on the speed of your computer, it may
take up to 30 seconds for the PCI card to be detected.
9. Windows will detect the "PCI Standard PCI to PCI Bridge"
10. Select "Search for the best driver for your device" and
11. Uncheck all the boxes and click "Next".
12. Windows will locate the drivers for "PCI Standard PCI to
13. Installation of the "PCI Standard PCI to PCI Bridge" will now
14. Windows will detect the "NEC Firewarden OHCI Compliant
15. Select "Search for the best driver for your device" and
16. Uncheck all the boxes and click "Next".
17. Windows will now search its driver database for the required
18. Installation of the "NEC Firewarden OHCI Compliant IEEE
Downloaded from www.Manualslib.com
Installation (continued)
installation of the required drivers will begin.
and the "Add New Hardware Wizard" dialog box will open.
Click "Next".
click "Next".
PCI Bridge". Click "Next".
(Windows may prompt you to insert the Windows OS
installation CD. If so, insert the CD into the CD-ROM drive
and continue the installation procedure).
complete. Click "Finish".
IEEE 1394 Host Controller". Click "Next".
click "Next".
driver. Click "Next".
1394 Host Controller" is now complete. Click "Finish".
manuals search engine
6