ASROCK 4Core1333-eSATA2 Handbuch Seite 29

Downloaded from www.Manualslib.com
2.12 2.12 Serial A 2.12 2.12 2.12 Serial A Serial A Serial AT T T T T A (SA Serial A A (SA A (SA A (SA A (SAT T T T T A) / Serial A A) / Serial A A) / Serial A A) / Serial AT T T T T AII (SA A) / Serial A
Installation Installation Installation Installation Installation
This motherboard adopts Intel
ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 10,
RAID 5, and Intel Matrix Storage) functions. You may install SATA / SATAII hard
disks on this motherboard for internal storage devices. This section will guide you
to install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
1. If you plan to use RAID 0, RAID 1, or Intel Matrix Storage function, you
need to install at least 2 SATA / SATAII hard disks. If you plan to use
RAID 5 function, you need to install at least 3 SATA / SATAII hard disks.
If you plan to use RAID 10 function, you need to install at least 4 SATA /
SATAII hard disks.
2. It is not recommended to switch the "Configure SATA as" setting between
AHCI, RAID, and IDE mode after OS installation.
ASRock 4Core1333-eSATA2 Motherboard
manuals search engine
AII (SAT T T T T AII) Hard Disks AII (SA AII (SA AII (SA AII) Hard Disks AII) Hard Disks AII) Hard Disks AII) Hard Disks
®
ICH7R south bridge chipset that supports Serial
2 9 2 9 2 9
2 9 2 9