ASROCK 4Core1333-eSATA2 Handbuch Seite 21

Downloaded from www.Manualslib.com
eSATAII Connector
(eSATAII: see p.2, No. 36)
Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Header
(9-pin USB4_5)
(see p.2 No. 17)
WiFi Header
(11-pin WIFI)
(see p.2 No. 23)
ASRock 4Core1333-eSATA2 Motherboard
manuals search engine
This eSATAII connector
supports SATA data cable for
external SATAII function. The
current eSATAII interface
eSATAII
allows up to 3.0 Gb/s data
transfer rate.
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on this motherboard.
You can also use the SATA data
cable to connect
SATAII_ORANGE (Port3)
connector and eSATAII
connector.
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
Besides four default USB 2.0
ports on the I/O panel, there is
one USB 2.0 header on this
motherboard. This USB 2.0
header can support two USB
2.0 ports.
This header supports WiFi+AP
function with ASRock
WiFi-802.11g or WiFi-802.11n
module, an easy-to-use wireless
local area network (WLAN)
adapter. It allows you to create a
wireless environment and enjoy the
convenience of wireless network
connectivity.
2 1 2 1 2 1
2 1 2 1