Compliance Information - Rimage Professional 5000N serie Benutzerhandbuch

Compliance Information

Product name:
Model:
Notice for USA
C
Notice for Canada
Notice for Europe
Notice for Japan
Notice for Australia
2000447_C
Downloaded from www.Manualslib.com
Rimage Professional 5100N
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when this
equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own
expense.
This product complies with UL 60950-1, 1
US
This Class A digital apparatus complies with Canadian ICES-
003 Issue 4:2004. Cet appareil numerigue de la classe A est
conforme a la norme NMB-003 du Canade.
This product complies with CAN/CSA-C22.2 No. 60950-1-03
1 edition.
st
This product is in conformity with the EMC Directive (89/336/
EEC) and the Low-Voltage Directive (73/23/EEC) through
compliance with the following European standards:
IEC 60950-1 2001, 1
A2:2003, EN 55024:1998 + A1:2001 + A2:2003, EN 61000-3-
2:2000 + A2:2005, EN 61000-3-3:1995 + A1:2001 + A2:2005.
The CE mark has been affixed in accordance with the CE
Marking Directive 93/68/EEC.
This product complies with VCCI V.3/2006.04.
This is a Class A product based on the standard of the
Voluntary Control Council for Interference by Information
Technology Equipment (VCCI). If this equipment is used in a
domestic environment, radio interference may occur, in which
case, the user may be required to take corrective action.
This product complies with AS/NZS CISPR22:2004.
manuals search engine
Important Information
Rimage Professional 5300N
RAS23E
edition, EN 55022:1998 + A1:2000 +
st
RAS22E
edition.
st
5