Preventative Maintenance Schedule - Rimage Professional 5000N serie Benutzerhandbuch

Preventative Maintenance Schedule

Use the following table as a guideline for how often to perform preventative
maintenance tasks.

Before you begin:
1.
2.
Tool
Lint-free cloth
Non-abbrasive, all-
purpose solvent
Lint-free cloth
Non-abbrasive, all-
purpose solvent
Can of
compressed air
Vacuum
Can of
compressed air
Torx T25 driver
2000447_C
Downloaded from www.Manualslib.com
Note: Your system may require more frequent maintenance if used in a
dusty area, such as a store or warehouse.
Power off the 5000N.
Disconnect the power cord.
Task
Wipe down the lead screw and pay
close attention to:
•
the area just above the bearing at
the base of the lead screw
•
the area just above the lift arm
Wipe down all surfaces of the
autoloader, including:
•
sides and top
•
Input bins
•
output trays
•
output bin
•
base (remove the input bin first)
•
top surface on the lift arm
Remove dust and debris from the
fans at the back of the autoloader.
Remove dust and debris from
the openings at the back of the
autoloader.
Remove the side panels and remove
all dust from the embedded PC.
Align the Everest printer. Refer to
the
page 23.
manuals search engine
Maintain the 5000N
Align the Printer instructions on
Frequency
Weekly
Weekly
Monthly
Monthly
Monthly
On installation
and as needed.
17