Parts Information; Operator Panel; Output Trays (5300N Only) - Rimage Professional 5000N serie Benutzerhandbuch

Parts Information

Operator Panel

The operator panel has a two-line display that informs you of operations or any
conditions that require operator intervention.
The 5000N displays the name of the embedded PC or product name after it
initializes. Refer to the
options.


Output Trays (5300N only)

The 5300N is configured with five output trays. When a disc is recorded and
printed, the lift arm moves the disc to the output bin or one of the output trays.
The disc slides out to the end of the tray. The sensor located on each output tray
detects if a disc is present in the output tray. The output trays are numbered 1 - 5,
with 1 located at the top.
10
Downloaded from www.Manualslib.com
Rimage Professional 5100N and 5300N User Guide
Operate Gemini Utilities
Note: The caret symbol '^' in the upper right corner of the display indicates
that the Rimage software is currently communicating with the system.
Output Trays
(5300N only)
manuals search engine
Operator
Panel
section on page 26 to see other
2000447_C