Exit Diagnostic Test Mode - Rimage Professional 5000N serie Benutzerhandbuch

Output Bin Present Diagnostic Test (5300N only)
This tests the output bin door sensor.
1.
2.
3.

Exit Diagnostic Test Mode

1.
2.
22
Downloaded from www.Manualslib.com
Rimage Professional 5100N and 5300N User Guide
Open the output bin. The sensor beeps and operator panel displays [0] to
show the change in status.
Close the output bin. The sensor beeps and operator panel displays [1] to
show the change in status.
Press and hold the operator button to exit the test.
If a diagnostic test is currently running, press the operator button once to
stop the test.
When the diagnostic test is stopped, press the operator button seven times
and hold it on the seventh press. The operator panel displays [RELEASE
BUTTON]. The autoloader exits diagnostic test mode and the autoloader
resets.
manuals search engine
2000447_C