Honeywell HF Serie Benutzerhandbuch Seite 8

INSTALLATION (CONTINUED)
Note: After setting the window bracket to the size of your window, please remove it from the window
and follow the instructions below.
3. Connect the hose to the rear exhaust outlet on the back of the unit. Slide-in the hose connector
then rotate clockwise until it is locked in place.
4. Connect the window bracket to the window bracket panel adapter. Ensure that all connections are
tight and installed properly.
5. Cut the Foam Seal (adhesive) to the proper length and attach them to the window sash
and frame.
Horizontal Sliding Window
Hose:
Dia. 5.9" (15 cm)
Length: 10.6" to 59" (27 cm to 150 cm)
Vertical Sliding Window
EN 4