Troubleshooting - Canon Prima BF-9S Handbuch

04-K129AmeEuro (p.108~).qxd
Ó

Troubleshooting

In case of trouble check the table below before taking you
camera to be repaired.
Problem
The icon
blinks on the LCD
panel.
The icon is
not displayed on
the LCD panel.
The shutter does
not release.
The camera does
not work even after
new batteries have
been installed.
The photographs
are blurred.
The entire picture
appears cloudy.
108
01.08.00
Cause
• The batteries are • Replace the new
expired.
• No battery is loaded. • Load the batteries.
• The battries are • Reinsert the
inserted with the
wrong polarities.
• The batteries have • Replace the new
completely expired.
• The power is turned • Turn the power on.
off.
• The batteries are • Replace the new
expired.
• A rewound film is • Remove the film
loaded in the
camera.
• The film is not • Reload the film.
loaded properly.
• Due to the
• Remove the
characteristics of the
batteries.
• The camera moved • Press the shutter
when the shutter
button was pressed
(camera shake).
• The lens is dirty. • Wipe the lens with
15:06
Remedy Page
26
batteries.
26
26
batteries correctly.
26
batteries.
28
26
batteries.
36, 64
and load a new
one.
36
26
batteries, then
insert them again
after about 10
minutes have
elapsed.
42
button slowly and
gently.
a lens cloth.
Page 108