Philips Sunmobile HB952 Bedienungsanleitung Seite 9

During this minute, you can press the pause/repeat button § to repeat the set time (fig. 22).
The display shows the set time and starts to count down.The beeping stops.
It is also possible to set a new time.
By doing this, you can avoid the 3-minute waiting time which is necessary to allow the tanning lamps
to cool down after they have been switched off.
This waiting time does not apply to the infrared lamps (type HB955 only).
Set a new time by pushing the ¢ or £ buttons.Then push the start button ∞ (fig. 23).
5
The beeping stops and the time that has just been set starts counting down.
When you do not repeat the session by pressing § or set a new time during the last minute
of the session, the countdown continues and the appliance will automatically switch off as
soon as the set time has passed.
Interrupting the tanning or relax session
Interrupt the tanning session by pushing the pause/repeat § button (fig. 24).
1
The lamps will be switched off, P appears in the display together with the remaining time. For 3
minutes the remaining time will blink. During this time the lamps cool down.When the blinking has
stopped, you can switch the appliance back on again by pushing the ∞ button.The remaining time
will now be counted down.
Interrupt the relax session by pushing the pause/repeat § button.
2
The lamps will be switched off, P appears in the display together with the remaining time (not
blinking).You can switch the appliance back on immediately by pushing the ∞ button.The waiting
time does not apply to the infrared lamps.The remaining time will be counted down.
Changing the tanning or relax time during a session
When you are tanning, you can change the set time by pushing the ∞ button.The lamps will
1
be switched off.Then set a new time by pushing the ¢ £ buttons.Wait until the set time has
stopped blinking (this will take 3 minutes because the lamps have to cool down first) and
push the ∞ button again.
When relaxing (–), you can change the set time by pushing the ∞ button.The lamps will be
2
switched off.You can set a new time and switch the appliance back on immediately by pushing
the ∞ button.The waiting time does not apply to the infrared lamps (the newly set time does
not blink on the display).
Make sure the right lamps are on: (HB955 only)
Tanning: four lamps emitting bluish light.
B
Relax: four lamps emitting reddish light.
B
After the tanning session
1 Keep track of the number of sessions you have had by means of the memory knobs (types
HB952 and HB955 only).The appliance has two memory knobs: one per person (fig. 25).
Cooling
The appliance is cooled by means of fans to prevent materials and parts from becoming too hot.
The tanning lamps won't go on if they are too hot (see for instance "Interrupting the tanning or
relax session").
After you have switched off the tanning lamps or infrared lamps, the fans will continue to
work for three more minutes.
Downloaded from www.Manualslib.com manuals search engine
ENGLISH
9