Topcom Twintalker 1300 Bedienungsanleitung Seite 8

TOPCOM TWINTALKER 1300
12.8 BUTTON LOCK
SC
TX RX
12.9 CALL TONES
A call tone alerts others that you want to talk.
a. Setting the Call Tone
SC
TX RX
b. Sending a call Tone
Press briefly. The call tone will be transmitted for 3 seconds on the set channel.
12.10 KEY-TONE ON/OFF
When a button is pressed, the unit will beep briefly.
SC
TX RX
12.11 ROGER BEEP ON/OFF
After the
PTT
SC
TX RX
12.12 * OPTIONAL HEADSET CONNECTION
8
Downloaded from www.Manualslib.com
• Press and hold for 2 seconds to activate or deactivate the BUTTON LOCK mode. The BUTTON
LOCK icon is displayed on the LCD Screen.
• Press and hold again to deactivate BUTTON LOCK
5 different Call Tones can be selected.
• Press 2 times. CA will be displayed.
• Press or to select another call tone or select OF to enable call tones.
• Press to confirm your selection and return to the standby mode.
PTT
To set the key-tone.
• Press 3 times. 'to' will be displayed.
• Press to enable (ON) or
• Press to confirm your selection and return to the standby mode.
PTT
- button is released, the unit will send out a roger beep to confirm that you have stopped talking.
To set the Roger Beep.
• Press 4 times. 'ro' will be displayed.
• Press to enable (ON) or
• Press to confirm your selection and return to the standby mode.
PTT
The Twintalker 1300 can be used with an optional external microphone and speaker (not
inclused)
The connector is located under the protective rubber cover on the top of the unit.To attach the
external speaker/microphone headsets or earpiece, lift the rubber flap on the top of the unit to
expose the connector.
Insert the appropriate plug into the connector.
manuals search engine
disable the key-tone (OF).
disable the Roger-Beep (OF).
TOPCOM TWINTALKER 1300