Troubleshooting Table - Echo PB-8010 Bedienungsanleitung

Maintenance and care

Troubleshooting table

Problem
Engine is diffi- No fuel is entering the over-
cult to start, fluc- flow pipe
tuating rotation
or Fuel is entering the over-
flow pipe
The engine The crankshaft does not ro-
does not start tate
The spark plug is dirty or
damp
Engine starts
but no accelera-
tion is possible
 Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your ECHO DEALER. Do not attempt to dismantle the product.
 Consult your ECHO DEALER in the event of a problem that is not covered in the table above, or other such concerns.
 For spare parts and consumables, please use only genuine parts and designated products and components. Using parts from
other manufacturers or non-designated components may result in a malfunction.
Diagnosis
Fuel filter is clogged
Fuel system is clogged
Internal carburettor parts sticking
Fuel degradation
Carburettor problem
Internal engine malfunction
Fuel degradation
Incorrect electrode gap
Carbon deposits
Electrical fault
Dirty air filter
Dirty fuel filter
Blocked fuel passage
Carburettor adjustment problem
Spark plug problem
Blocked exhaust vent or silencer vent
Spark arrester screen plugged or normal
wear
Cause
26
Solution
Clean or replace
Clean
Consult your ECHO
DEALER
Replace with new fuel
Consult your ECHO
DEALER
Consult your ECHO
DEALER
Replace with new fuel
Adjust or replace
Clean or replace
Consult your ECHO
DEALER
Clean or replace
Clean or replace
Consult your ECHO
DEALER
Consult your ECHO
DEALER
Clean, adjust or replace
Clean
Clean or replace