NEC MultiSync LCD1850X Bedienerhandbuch Seite 26

OUT OF RANGE: This function gives a
recommendation of the optimized resolution and refresh
rate. After the power is turned on or there is a change of
input signal or the video signal doesn't have proper
timing, the Out Of Range menu will appear.
CHECK CABLE: This function will advise you to check
all Video Inputs on the monitor and computer to make
sure they are properly connected.
NOTE: If " CHANGE DVI SELECTION" is displayed, switch to
DVI SELECTION.
English-15
01b_English 15 2/4/01, 3:39 pm
Downloaded from www.Manualslib.com manuals search engine