NEC MultiSync LCD1850X Bedienerhandbuch Seite 20

Downloaded from www.Manualslib.com
Controls
OSM (On-Screen-Manager) Controls
The OSM controls on the front of the monitor function as follows:
To access OSM press any of the control buttons ( , , -, +).
To change DVI/D-SUB signal input, press the NEXT button.
To rotate OSM between Landscape and Portrait modes, press the
RESET button.
NOTE: OSM menu must be closed in order to change signal input and
to rotate.
Control Menu
EXIT Exits the OSM controls.
Exits to the OSM main menu.
CONTROL / Moves the highlighted area left/right to select control
menus.
Moves the highlighted area up/down to select one of the
controls.
Moves the bar left/right to increase or decrease the
ADJUST -/+
adjustment.
Activates Auto Adjust function.
Enter the sub menu.
NEXT Moves the highlighted area of main menu right to select
one of the controls.
RESET Resets the highlighted control menu to the factory setting.
Resets the highlighted control to the factory setting.
NOTE: When RESET is pressed in the main and sub-menu, a warning
window will appear allowing you to cancel the RESET function
by pressing the EXIT button.
01b_English
manuals search engine
English-9
9 2/4/01, 3:39 pm