Auto Pan Setup; Pattern Setup - Samsung SCC-C7478 Benutzerhandbuch

If you want to use blank, choose Space
character (" "). If you want to delete a character
before, use back space character (" ").
③ If you complete the Label editing, move cursor
to "OK" and press NEAR or ENTER key to save
completed label. To abort current change, move
cursor to "Cancel" and press NEAR or ENTER key.

AUTO PAN SETUP

AUTO PAN SETUP
APAN NO.
1ST POS.
2ND POS.
APAN SPEED
CLEAR APAN
BACK
EXIT
• Auto Pan Number
Selects Auto Pan number to edit. If a selected Auto
Pan has not defi ned, "NOT USED" is displayed in 1st
Position and 2nd Position
• 1st Position / 2nd Position [PRESET 1~128]
Set up the 2 position for Auto Pan function. If a
selected preset is not defi ned, "UNDEFINED" will be
displayed as shown below.
AUTO PAN SETUP
APAN NO.
1ST POS.
2ND POS.
How to use OSD Menu
Back Space Char.
Space Char.
1
NOT USED
NOT USED
30/SEC
CANCEL
[1~8]
1
PRESET5
PRESET8
UNDEFINED
When Auto Pan function runs, camera moves
from the preset assigned as the 1st point to the
preset assigned as the 2nd point in CW(Clockwise)
direction. Then camera moves from the preset
assigned as the 2nd point to the preset assigned as
the 1st point in CCW(Counterclockwise) direction.
In case that the preset assigned as the 1st point
is same as the preset assigned as the 2nd point,
camera turns on its axis by 360° in CW direction and
then it turns on its axis by 360° in CCW direction.
• APAN(AUTO PAN) Speed [1°/sec ~180°/sec]
Sets Auto Pan speed from 1°/sec to 180°/sec.
• Clear APAN(AUTO PAN)
Deletes current Auto Pan data.

PATTERN SETUP

PATTERN SETUP
PATTERN NO.
CLEAR PATTERN CANCEL
<EDIT PATTERN>
BACK
EXIT
• Pattern Number [1~4 ]
Selects Pattern number to edit.
If a selected pattern number is not defi ned,
"UNDEFINED" will be displayed under selected
pattern number.
• Clear Pattern [CANCEL/OK]
Deletes data in current pattern
• Edit Pattern
Starts editing pattern.
[CANCEL/OK]
1
UNDEFINED
English – 23