Osd Display Of Main Screen; General Rules Of Key Operation For Menu - Samsung SCC-C7478 Benutzerhandbuch

Operation
be set up independently for each preset. There
are 2 modes, "General" mode & "Special" mode.
The General mode means that WB or AE can be
set up totally and simultaneously for all presets in
"ZOOM CAMERA SETUP" menu. The Special mode
means that WB or AE can be set up independently
or separately for each preset in each preset setup
menu. Each Special WB/AE value should activate
correspondingly when camera arrives at each preset
location.
During jog operation, General WB/AE value should
be applied. All Special WB/AE value will not be
changed although General WB/AE value change.
• Semi Auto Focus
This mode exchanges focus mode automatically
between Manual Focus mode and Auto Focus mode
by operation. Manual Focus mode activates in preset
operation and Auto Focus mode activates during jog
operation. With Manual mode at presets, Focus data
is memorized in each preset in advance and camera
calls focus data in correspondence with presets as
soon as camera arrives at a preset. It should shorten
time to get focuses.
Focus mode changes to Auto Focus mode
automatically when jog operation starts.

OSD DISPLAY OF MAIN SCREEN

LABEL12345
Preset Lable 1
Date/Time
Camera ID
Image Flip
Camera ID
• P/T/Z Information
Current Pan/Tilt angle in degree, zoom magnifi cation
and a compass direction.
• Camera ID
Current Camera ID(Address).
• Action Title
Followings are possible Action Titles and their meaning.
"SET PRESET ×××"
18 – 36x SMART DOME CAMERA
PRESET1
Alarm Information
P/T/Z Information
• Preset Label
The Label stored for specifi c Preset.
• Alarm Information
This information shows current state of Alarm Input.
The "I" means Input and "O" is output. If an Input is
ON state it will show the number of input. If an Input
is OFF state, '-' will be displayed. In the same way
"O :1" means output 1 is ON "O :-" is OFF.
Ex) When Point 2 of inputs are ON, and Output 1 is
On, OSD will show as below
• Image Flip
Shows that images are currently reversed by Auto
Flip Function.
• Date/Time
Displays Current Date and Time.
GENERAL RULES OF KEY
OPERATION FOR MENU
Action Title
• The menu items surrounded with < > always has its
sub menu.
• For all menu level, to go into sub menu, press NEAR
or ENTER key.
• To go to up-one-level menu, press FAR key.
• To move from items to item in the menu, use joystick
in the Up/Down or Left/Right.
• To change a value of an item, use Up/Down of the
joystick in the controller.
• Press NEAR or ENTER key to save values and
Press FAR key to cancel values.
"PRESET ×××"
"PATTERN ×"
"AUP×/PRESET ×××"
"UNDEFINED"