Function Setup - Samsung SCC-C7478 Benutzerhandbuch

❖
Parking Action Setup
PARKING ACTION SETUP
PARK ENABLE
WATT TIME
PARK ACTION
BACK
EXIT
If Park Enable is set to ON, camera runs assigned
function automatically if there is no PTZ command
during assigned "Wait Time".
• Park Enable
• Wait Time
The time is displayed with "hh:mm:ss" format and
you can change this by 1 sec unit.
• Park Action
[HOME/PRESET/PATTERN/AUTOPAN/SCAN]
Ex) If HOME is selected for Park Action, camera
will move to home position when there is no PTZ
command during assigned "Wait Time."
❖
Alarm Input Setup
ALARM INPUT SETUP
ALARM1 N.0
ALARM2 N.0
ALARM3 N.0
ALARM4 N.0
ALARM5 N.0
ALARM6 N.0
ALARM7 N.0
ALARM8 N.0
BACK
EXIT
Match the Alarm sensor input to one of Preset
positions. If an external sensor is activated, camera
will move to corresponding preset position when this
item is predefi ned.
• Alarm Type
[Normal OPEN(N.O) / Normal CLOSE(N.C)]
Sets sensor input type.
• Alarm Action
[NOT USED/HOME/PRESET 1~128/APAN 1~8,
PATTERN1~4, SCAN 1~4]
For each Alarm input, you can assign counteraction
functions (Preset, Auto Pan, Pattern, Scan).
How to use OSD Menu
OFF
00:10:00
HOME
[ON/OFF]
[5 sec ~ 4 hour]
PRESET1
NOT USED
NOT USED
NOT USED
PRESET1
NOT USED
NOT USED
NOT USED

FUNCTION SETUP

FUNCTION SETUP
<PRESET SETUP>
<AUTO PAN SETUP>
<PATTERN SETUP>
<SCAN SETUP>
<SCHEDULE SETUP>
BACK
EXIT
Confi gure 5 Special Functions with this menu
• Preset Setup
127 Presets from the number 1 to 128 can be
assigned excluding preset 95 reserved for Menu.
• Auto Pan Setup
Up to 8 Auto Pans are available, which makes
camera to move slowly between two preset points.
• Pattern Setup
Up to 4 patterns can be stored in the dome.
In this function, path data created by manual move
of Joystick are recorded and you can playback the
identical path automatically whenever required.
• Scan Setup
Up to 8 Scans can be defi ned.
In a Scan, max 20 entities are assigned from any
combinations of Preset/Auto Pan/Pattern. If you run
a Scan, camera will execute each entry sequentially.
• Schedule Setup
7 rules of Schedule can be assigned by day and
time. Appropriate actions (such as Home, Preset,
Auto Pan, Pattern and Scan) can be defi ned for
each rule. Also, it is possible to use Weekday and
Weekend in a rule to make it simple.
English – 21