Cleaning; Storage; Disposal - Silvercrest SFE 1500 B2 Bedienungsanleitung

__RP100109_B4.book Seite 8 Mittwoch, 14. Mai 2014 10:52 10

8. Cleaning

DANGER! Risk of electric
shock!
• Remove the mains plug from the wall
socket before cleaning the electric fon-
due.
• Do not immerse the heating unit|5, the
power cable|10 or the mains plug in
water or any other liquid.
DANGER! Risk of injury
through burning!
Leave all parts to cool down fully be-
fore emptying the pot and cleaning.
DANGER! Risk of injury from
cutting!
The fondue forks|8 are very sharp.
WARNING! Risk of material damage!
• Do not use any astringent or abrasive
cleaning agents.
• Do not pour liquid fat down the sink:
when it cools, it may block the drains.
Heating unit
• Clean the heating unit|5 with a soft,
damp cloth using a mild soap solution.
Accessories
• Clean the stainless steel pot|2, splash
guard|1 and fondue forks|8 with a mild
detergent.
Emptying the stainless steel pot
Fat which becomes hard when cooled down
can be easily poured off when it is in a cooled
but still liquid state. Liquid fat can be poured
back into a suitable vessel, if required. Dis-
pose of old fat via your local disposal facility
or discard with household waste.
NOTE: burnt-on food or fat residue is often
easier to remove if you fill the pot with water,
add a sachet of baking soda and leave to
stand overnight.
8
GB

9. Storage

DANGER for children!
The electric fondue should be kept out of the
reach of children.
WARNING! Risk of material damage!
Figure A: do not wind the power cable|10
around the device but anti-clockwise into the
housing base|7 of the heating unit|5.
• Clean all parts and make sure they are
properly dry before putting away the
electric fondue.

10. Disposal

The symbol showing a
wheelie bin crossed through
indicates that the product re-
quires separate refuse collec-
tion in the European Union.
This applies to the product
and all accessories marked with this symbol.
Products identified with this symbol may not
be discarded with normal household waste,
but have to be taken to a collection point for
recycling electric and electronic devices. Re-
cycling helps to reduce the consumption of
raw materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.