Scan Mode; Measurement Range And Accuracy - Leica GEOVID 42 HD-R Anleitung

scan mode

The Leica Geovid HD-R binoculars can be used to
measure continuously. Holding down the release
button (5) the 2nd time it is pressed switches the
device to scan mode after around 0.5s and it
then performs continuous measurements. This
can be seen by a change in the display: Around
every 1.5s a new measured value is shown.
Scan mode is particularly practical for measuring
small targets.
notes:
• Because of the continuous measurements,
power consumption is greater in scan mode
than for single measurements.
• After 10s, scan mode is automatically
deactivated to conserve the battery if the
button has been pressed unintentionally.
• In scan mode, the value is only displayed
EHr
for the last measurement.

measuremenT range and accuracy

The measuring accuracy of the Leica Geovid
HD-R binoculars is up to ± 1 meter/yard. The
maximum range is achieved with well reflecting
target objects and a visual range of 10km. The
measuring range is influenced by the following
factors:
range longer
color of object
White
angle to object
Perpendicular
object size
Large
general
Low (cloudy)
brightness
atmospheric
Clear
conditions
object structure
Homogeneous
(wall of
building)
26
shorter
Black
Acute
Small
High (midday
sun)
Hazy
Inhomogeneous
(bush, tree)