Equivalent Horizontal Range (Ehr) - Leica GEOVID 42 HD-R Anleitung

eQuiValenT horizonTal range (
Shots at targets at a higher or lower position are
subject to changed ballistic conditions. Therefore,
they require knowledge of the equivalent
horizontal range, which is relevant for hunting.
For example, knowing the
using ballistic reticles.
The Leica Geovid HD-R calculates this
the linear range measured, a correction factor,
and from the measured angle.
For individual measurements, the Leica Geovid
HD-R will always show you the direct linear
distance to the target first. After around 2s, the
display changes to the equivalent horizontal
range.
)
EHr
is important when
EHr
from
EHr
25
note:
• values are only specified between 10m and
EHr
550m for safety reasons. The actual measured
linear range is also specified.
• The function cannot be disabled.
EHr
important:
• Please note that particularly at long ranges, the
influence of all relevant ballistic influencing
factors is greatly increased and considerable
variations can occur. The ballistic values
displayed should therefore only be viewed as a
guideline.
• Regardless of whether this information is used,
you are responsible for assessing the relevant
hunting situation.