Product Description And Specifications; Intended Use; Product Features - Bosch GWS 24-300 J Professional Originalbetriebsanleitung

All manuals and user guides at all-guides.com
OBJ_BUCH-280-005.book Page 15 Friday, July 4, 2014 10:30 AM
 Do not restart the cutting operation in the workpiece.
Let the wheel reach full speed and carefully re-enter
the cut. The wheel may bind, walk up or kickback if the
power tool is restarted in the workpiece.
 Support panels or any oversized workpiece to minimize
the risk of wheel pinching and kickback. Large work-
pieces tend to sag under their own weight. Supports must
be placed under the workpiece near the line of cut and near
the edge of the workpiece on both sides of the wheel.
 Use extra caution when making a "pocket cut" into ex-
isting walls or other blind areas. The protruding wheel
may cut gas or water pipes, electrical wiring or objects that
can cause kickback.
Additional safety warnings
Wear safety goggles.
 Use clamps or another practical way to secure and sup-
port the workpiece to a stable platform. Holding the
work by your hand or against the body leaves it unstable
and may lead to loss of control.
 Wear hearing protection, safety goggles, dust mask
and gloves. As dust mask, use at least a particle filter-
ing half mask of filter class FFP 2.
 Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
 When working stone, use dust extraction. The vacuum
cleaner must be approved for the extraction of stone
dust. Using this equipment reduces dust-related hazards.
 Use a cutting guide when cutting stone. Without sideward
guidance, the cutting disc can jam and cause kickback.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Bosch Power Tools
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The machine is intended for cutting metal and stone materials
without using water while resting firmly with the cutting guide
on the workpiece.
For cutting stone, a special cutting guide with dust extraction
protection guard (accessory) must be used.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Bow handle
2 Thread for bow handle
3 Spindle lock button
4 Direction-of-rotation arrow for grinding spindle
5 Grinder spindle
6 Protection guard for cutting
7 Screw for adjustment of protection guard
8 Clamping lever for protection guard
9 Mounting flange
10 Grinding/cutting disc*
11 Face plate
12 Quick-clamping nut
13 Clamping nut
14 Hex Key**
15 Cutting guide
16 On/Off switch
17 Encoding key
18 Cutting guide with dust extraction protection guard *
19 Elbow *
20 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
English | 15
*
1 609 92A 0J8 | (4.7.14)