Symbols And Their Meaning; Product Description And Specifications; Intended Use; Product Features - Bosch GCM 18V-216 Professional heavy duty Originalbetriebsanleitung

Symbols and their meaning

Danger area! Keep hands, fingers and
arms away from this area.
The adjustable fence must be pulled out-
wards when sawing bevel angles.
3 601 M41 000, Take note of the dimensions of the saw
blade. The hole diameter must fit the tool
3 601 M41 040:
spindle without play. If it is necessary to
use reducers, ensure that the dimensions
of the reducer are suitable for the base
blade thickness and the saw blade hole
3 601 M41 0B0:
diameter, as well as the tool spindle dia-
meter. Wherever possible, use the redu-
cers provided with the saw blade.
25,4
The saw blade diameter must match the
information specified on the symbol.
Shows the rotational direction of the SDS
bolt for tightening the saw blade (anti-
clockwise) and for loosening the saw
blade (clockwise).
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is a stationary machine for cutting in a
straight line with and against the grain in hardwood, soft-
wood, chipboard and fibreboard. It is possible to cut mitre
angles of –47° to +47° and bevel angles of 0° to +45°.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
Slide device
(1)
A)
(2) Dust bag
(3) Chip ejector
(4) Transport handle
(5) Depth stop adjusting screw
(6) Laser protection cap
(7) Lock-off button for on/off switch
(8) On/off switch
(9) Handle
Bosch Power Tools
(10) Protective guard
(11) Retracting blade guard
(12) Guide roller
(13) Fence
(14) Saw table extension
(15) Clamping screw for saw table extension
(16) Mounting holes
(17) Saw table
(18) Insert plate
(19) Locking knob for all mitre angles
(20) Mitre pre-setting lever
(21) Tilt protector
(22) Angle indicator for mitre angles
(23) Detents for standard mitre angles
(24) Scale for mitre angles
(25) Adjustable fence
(26) Screw clamp
(27) Chip deflector
(28) Stop for standard 45° bevel angle
(29) Stop screw for 45° bevel angle
(30) Depth stop
(31) Clamping handle for all bevel angles
(32) Locking screw for slide device
(33) Spindle lock
(34) Battery
(35) Battery release button
(36) Transport safety lock
(37) Scale for bevel angles
(38) Angle indicator for bevel angles
(39) Stop screw for 0° bevel angle
(40) Stop for standard 0° bevel angle
(41) Hex key (5 mm)
(42) Battery charge indicator
(43) Button for battery charge indicator
(44) Hex socket screw for mounting the saw blade
(45) Clamping flange
(46) Saw blade
(47) Inner clamping flange
(48) SDS bolt
(49) Locking screw for the adjustable fence
(50) Threaded rod
(51) Holes for screw clamp
(52) Laser beam outlet aperture
(53) Screws for insert plate
(54) Set screw for laser positioning (parallelism)
(55) Screw for bevel angle indicator
English | 29
1 609 92A 4UN | (05.06.2019)