JUFLO LED TABLE EVENT TABLE Bedienungsanleitung Seite 33

Nr. Button Function
1 1, 2, 3, 4 Display for groups 1...4. The button of the selected group lights up red.
2 [GROUP] You can control up to four groups of devices separately. Press [GROUP] to
select the group to control. The button of the selected group lights up red.
Hold down [GROUP] to control all groups simultaneously.
3
Press
Press
4 Press
access preset 1.
Preset 1...14: static colours
Preset 15...20: preprogrammed colour changes or sequences
5 Press
Hold down
Preset 1...14: static colours
Preset 15...20: preprogrammed colour changes or sequences
6 [SLOW] Press [SLOW] to decrease the flash frequency of the respective static colour
(preset 1...14) or the speed of the respective programme (Preset 15...20).
Hold down [SLOW] to pause the flash effect of a static colour or of a program-
me sequence.
7 [FAST] Press [FAST] to increase the flash frequency of the respective static colour
(preset 1...14) or the speed of the respective programme (Preset 15...20).
Hold down [FAST] to trigger the maximum flash effect frequency of a static
colour or programme sequence.
8
Press
9
Press
10 [BLACKOUT] Press [BLACKOUT] to blackout the light. The lights are still in ON state during
the blackout.
to enable the sound control.
again to disable the sound control.
to select a preprogrammed static colour or effect. Hold down
to select a preprogrammed static colour or effect.
to access preset 20.
to decrease the brightness in increments of 20 %.
to increase the brightness in increments of 20 %.
ENGLISH
to
33