JUFLO LED TABLE EVENT TABLE Bedienungsanleitung Seite 23

— Place Event Table on a sturdy surface
and make sure each leg is firm.
— Make sure that the respective table
leg has been inserted all the way into
the metal base and that the metal
slides (stainless steel plates with
return spring) have stuck firmly to
the respective leg. The end of the
table base can be recognized by a
gap between the tabletop and the
metal base.
— LED Table must not be set up by
children! The construction requires
strong hands and a trained look in the
structure!
— Make sure that the mounted table
does not fall over! The construction
is very robust, but it can still damage
the tabletop.
— Use only original accessories!
— Take care when mounting the LED
modules in the correct position. Both
the LED module on the top and the
bottom of the table have recesses
for mounting the LED modules.
DANGER! Danger for children
Ensure that plastic bags, packaging,
etc. are disposed of properly and
are not within reach of babies and
young children. Choking hazard!
Ensure that children do not detach
any small parts (e.g. knobs or the
like) from the unit. They could swal-
low the pieces and choke! Never let
children unattended use electrical
devices.
DANGER! Electric shock caused by
high voltages inside
Within the device there are areas
where high voltages may be pres-
ent. Never remove any covers.
There are no user-serviceable parts
inside. Do not use the device if
covers, protectors or optical com-
ponents are missing or damaged.
WARNING! Eye damage caused by
high light intensity
Never look directly into the light
source.
ENGLISH
23