Installation And Starting Up; Connecting The Device - JUFLO LED TABLE EVENT TABLE Bedienungsanleitung

2. INSTALLATION AND STARTING UP

2.1 Connecting the device

Mounting options
You can mount the device in three dif-
ferent ways:
— Standing on a smooth surface
— Fixing by magnet
— M6 inner screw thread (thread
depth 6 mm)
Connecting the LED light
The device is powered by the USB pow-
er adapter or a power bank. Connect
a maximum of 2 devices per USB port
(max 4 devices per splitter).
Establishing radio connection
between LED light and remote control
You can remotely control one or more
LED lights. First assign the device to
the remote control (pairing).
1. The remote control is in sleep mode
by default. Press any button on the
remote control to activate it.
The remote control is activated for
5 minutes. It can now receive and
transmit radio signals.
2. Connect the LED light to a USB
power source. The group set on the
remote control flashes.
3. To change the assignment of the
group, press [GROUP] on the remote
control. After 5 seconds, the group
assignment mode will automatically
turn off. The device is ready for oper-
ation in the selected group.
When delivered, the device is already
paired with the remote control.
ENGLISH
31