JUFLO LED TABLE EVENT TABLE Bedienungsanleitung Seite 24

LED TABLE
NOTICE! Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat-
source. Keep the device away from naked flames.
NOTICE! Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions specified in the chapter
'Technical specifications' of this user manual. Avoid heavy temperature fluctu-
ations and do not switch the device on immediately after it was exposed to tem-
perature fluctuations (for example after transport at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualified service personnel at regular intervals to prevent overheating and other
malfunction.
NOTICE! External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly the user. Unplug the external power supply before electrical storms
occur and when the device is unused for long periods of time to reduce the risk
of electric shock or fire.
24