Kerbl SH30 Bedienungsanleitung Seite 26

3. Connect the heating cable to the power supply.
Device type 222062: 230 V
device type 222063: 24 V (transformer required, see accessories)
4. Attach insulation and gnaw protection.
5. Earth water piping!
• The right connection is shown. The connection can also be established on the left!
• The entire water supply line must be protected from frost.
1
2
5
6
Gnaw area
7
3
4
8
1 Junction box, at least IP54
2 Power supply 24 V or 230 V
3 Heating cable end not heated
4 Heating cable end heated
5 Water supply line
6 Insulation
7 Gnaw protection
8 Heatable plastic drinking bowl SH30
26
3