BaByliss BeLiss Brushing 1000 Gebrauchshinweise Seite 12

Using the 50mm rotating head
A simple blow-dry for a glamorous, sensual hairstyle and hair, easy!
Perfect for medium-length and long hair
• To prepare the section and to untangle, lift the roots of the small section and straighten the section, with the unit set to hot, in
one or two strokes but without turning the brush; (6)
• Hold the section of hair at a 90° angle to your head so that the hair underneath doesn't get tangled; (7)
• Slide the brush over the section while turning the brush, but not completely, repeat several times while sliding the brush from
the roots to the tips; (8)
• Finish with a full turn of the section around the brush from roots to tips, hold a few seconds so that the section is completely
heated and shaped and so that the roots are lifted; (9)
• Repeat the operation if necessary, according to your hair type;
• Don't forget the shot of cool air at the end for a long-lasting set. To do this, use the cool-air shot without turning the rotating
head.
Blow-drying outwards
Place the brush under the section at the tips of your hair, and start the automatic rotation to turn outwards. (10) + (11)
Blow-drying under
Place the brush under the section at the tips of your hair, and start the automatic rotation to turn under. (12) + (13)
Caution! When you have fi nished using the rotating head, do not place it, as is, on the support, you risk damaging and bending the
bristles. Store it in the case intended for this purpose. (14)
Using the 20mm round brush
For soft blow-dried volume!
Optimal horizontal use on short hair
• To prepare the section and to untangle it, start at the roots of the small section and straighten the section in one or two strokes
with the unit set at hot;
• Hold the section at a 90° angle from the head to prevent the hair underneath from tangling;
• Slide the section over the brush by turning the tips around the brush;
• If your hair is long enough, fi nish with a full turn of the section around the brush by rolling back up to the roots and hold a few
seconds, so that the section is completely heated and shaped and so that the roots are full;
• Repeat if necessary, depending on your hair type;
• Finish with a shot of cool air for a long-lasting set of the hairstyle.
For spiral curls at the tips!
Optimal vertical use on long hair
• Take a small section of hair and start at the tips;
• Roll the section around the brush held vertically starting at the tips and making sure the tip is held securely on the brush;
• Take the section wound around the brush up to the roots and hold a few seconds, so that the section is completed heated and
takes the desired shape;
• Gently unwind the hair from the brush without pulling your hair, simply rotate in the other direction; (15)
• Repeat if necessary, depending on your hair type;
• Set your hairstyle using the shot of cool air;
• Reshape the curl with your fi ngers and use some hairspray or or styling lacquer for a hold that lasts longer. (16)
For the fi nishing touches!
The small brush lets you highlight the movement of certain sections, like redesigning the fringe or accentuating the fl are of the
tips, under or outwards.
Using the diff user
The diff user dries curly or very curly hair preserving their natural volume. While drying, shape your hair with your fi ngers to give it
more volume. Do not brush your hair afterwards to preserve the natural eff ect. (17)
Use the diff user for permed, dry, fragile or damaged hair. With the diff user, the recommended speed is I.
12