Battery Information - Anycom Blue HS-880 Bedienungsanleitung

4.0 Guidelines for safe and effective use
Emergency calls
Important!
A constant connection cannot be guaranteed under all conditions as the headset communicates with electronic
devices that are based on radio signals, landline and radio networks. We therefore do not recommend that
you rely solely on an electronic device for making emergency calls (e.g. in medical emergencies). For both
incoming and outgoing calls, make sure that the headset and the paired device are switched on and are located
within range of a radio network with a sufficiently strong signal. Please note that in some mobile phones the
emergency call function may be disrupted by interference in mobile networks or be restricted by certain mobile
phone features. For details, please contact your local service provider.

Battery information

When new the battery only has a fraction of its full capacity. Before it is used for the first time it must be fully
charged. To charge the battery, plug the adapter into the headset. The indicator light will show green when the
battery is fully charged.
49
4.0 Guidelines for safe and effective use
Battery care
Note: The battery should only be removed or replaced by professionals at a qualified Service Centre.
If handled with care, the battery will have a long lifespan.
Please note that a new battery or a battery that has not been used for a long period may not have its full
capacity.
Use only original ANYCOM accessories with your headset. Failure to do so will render your warranty invalid
and may have dangerous consequences.
Do not expose your headset to extreme temperatures above +55°C (+131°F).
Note: Charge the battery only at an ambient temperature between +10°C (+50°F) and +45°C (+113°F).
Further information on pairing with mobile phones and other details can be found at www.anycom.com.
50