Redialling - Anycom Blue HS-880 Bedienungsanleitung

2.0 Before you start and working with the headset
Making calls
Calling via voice command
1. Make sure that the headset is switched on and that the mobile phone is positioned within the required
range.
2. Press and hold the S1 button for approximately 2 seconds; the green LED indicator will light up and
the red LED indicator will flash.
3. When you hear a short beep, use voice commands in the normal way to call another subscriber.
4. To end the call, press the S1 headset button or the NO key on the mobile phone.
Making a call using the mobile phone keypad
1. Make sure that the headset and mobile phone are switched on and are positioned within the required
range of each other.
2. Enter the telephone number as usual.
3. As soon as the connection has been established, the call should automatically be transferred to the
headset.
4. To end the call, press the S1 headset button or the NO key on the mobile phone.
41
2.0 Before you start and working with the headset
Accepting a call
When someone calls you, wait until the headset alerts you to the call, then briefly press the S1 headset button
to accept it. To end the call, press the S1 headset button again or the NO key on the mobile phone.
Rejecting a call
If you do not wish to accept an incoming call, press and hold the S1 button until you hear a second tone.
The call has then been rejected.
Accepting a second call
You can answer a second incoming call during a conversation by pressing the YES key on the mobile phone
keypad or briefly pressing the S1 button on the headset. For information on how to manage a second call,
see the instructions for your phone.

2.8 Redialling

If you wish to redial the last number called, press and hold the S2 or S3 button for approximately 3 seconds.
The number will then be dialled.
42