Setting The Volume; Making And Receiving Calls - Anycom Blue HS-880 Bedienungsanleitung

2.0 Before you start and working with the headset

2.6 Setting the volume

Adjusting the volume during a call
You can change the volume during a conversation.
Volume control
• To reduce the volume, briefly press
the S2 headset button.
• To increase the volume, briefly press
the S3 headset button.
Each time you briefly depress this button, the volume is increased or decreased by one level.
NB: Do not hold the button in the final position as this will trigger another function (see Microphone on/off).
39
2.0 Before you start and working with the headset

2.7 Making and receiving calls

Once you have successfully paired the headset with your mobile phone, you can use it to make and receive
calls, provided that it is switched on and positioned within a maximum range of approximately 10 metres from
the mobile phone and there are no solid objects between them.
The headset can be used to start a call via a voice command, provided that your Bluetooth mobile phone is
equipped with this feature. For detailed information on voice commands, refer to the manual for your mobile
S3 button
phone.
S2 button
For incoming calls the LED indicator on the headset will flash for longer than usual.
You can use the S1 headset button to:
• make a call (via a voice command)
• receive a call
• end a call
40