Philips Supervapor 40 Gebrauchsanweisung Seite 7

- While steam-ironing
keep the steam
activator (F) pressed-in
(fig. 11).
• During steam-ironing
the two pilot lights (B)
and (G) will come on
from time to time.
When this happens,
either the iron or the
steam tank is being heated-up to the required
temperature. You can continue ironing.
"Shot-of-steam"
• Applying "shot-of-steam" (i.e. high steam output
coming from a limited number of holes in the
soleplate) can help remove stubborn wrinkles
over a large area. This is possible during dry-
ironing as well as steam-ironing.
- Always set the
temperature dial (H) to
the steam range
(2 or 3).
Otherwise the
soleplate is not hot
enough so that water
may drip from it.
- Press button (K)
(fig. 12).
"Jet of steam"
• Applying "jet of steam"
can help remove
stubborn wrinkles.
This is possible during
dry-ironing as well as
steam-ironing.
- Press button (J)
(fig. 13).
• It is not necessary to set the temperature
dial (H) to the steam range for "jet of steam".
Steaming in a vertical
position
Hanging curtains and
clothing (jackets,
woman's suits, coats)
can be steamed by
holding the iron in a
vertical position (fig. 14).
"Jet of steam" and
"Shot-of-steam" can be
11
12
13
14
applied as well in a vertical position.
Dry-ironing
• For ironing without steam, set the steam
control (I) to position O or do not press-in the
steam activator (F).
• You may switch off the steam tank by setting
switch (B) to Off-position (O) if you do not
intend to use "shot-of-steam" and/or "jet of
steam".
When finished ironing
- Switch off the steam
tank and the iron
(fig. 15, 16).
- Remove the mains
plug from the wall
socket.
- Place the iron on the
stand and let it cool
down.
• It is not necessary to
pour the remainder of
the water out of the
steam tank.
Cleaning
- Before cleaning remove the mains plug from
the wall socket and allow the iron to cool down
sufficiently.
- The appliance can be cleaned with a damp
cloth.
Storage
- For transport there are
handgrips on either
side of the steam tank
(fig. 17).
- Regularly check if the
mains cord and the
supply hose are still in
a good and safe condition.
7
15
16
17