Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.2.3 Operation and settings
Indication of required value
•
shortly press button
•
press button
Change of required value (required temperature)
•
press and hold button
•
the required value will be displayed and the diode
•
use button
or
•
confirm new value with button
NOTE!
If you need other settings or parameters, please download the attached description of the
temperature adjustment or leave this task to customer service employees.
Turning the device off
When the device is not used anymore, turn it off with ON/OFF switch and disconnect
from the power supply (pull the plug!).
Defrosting
Automatic defrosting
The device is automatically defrosted four times within 24 hours. The clock starts upon first activation. If the
automatic defrosting is to be carried out at other times, press
shows "
". Defrosting will start right away, the next defrosting will take place after 6 hours.
Defrosting manually
In addition to automatic defrosting, manually defrosting can be activated at any time, to do this, hold down the
for more than 2 seconds. Manual defrosting commences. The digital display shows "
NOTE!
Condensation water evaporates automatically.
5.2.4 Information for the user
•
Fill / complete the saladette only after the display has shown the required temperature.
•
Prepare the food products beforehand and place them in appropriate GN containers (see. section 4.1
"Technical data").
•
Next, place the GN container with food products on the grid in the fan doors or in the GN container area
under the glass top. When placing products in the saladette, the supplied adaptor bars may be used as
shelves for GN containers. Tip: Remember that the glass top area is not designed for cooling food products,
but only as a storage area.
•
Do not place any warm food products or liquids in the saladette. Allow them to cool down to room
temperature first.
•
When the saladette is in use, remember to leave enough space between the inner walls of the device and
the food placed inside to ensure air circulation inside the device.
•
The more food products in the saladette and the longer the doors/drawers stay open, the higher energy
consumptions.
•
To minimize the losses during the cooling process, do not leave doors open longer than necessary.
Furthermore, do not open them too often.
•
To avoid build-up of any unpleasant odours inside the saladette, observe the recommended shelf life of the
stored food products and regularly clear the device.
•
In the case of power outage, leave the doors, drawers and covers closed to prevent the loss of cooled air.
to show the required temperature;
again or wait 5 seconds to return to the previous indication.
for at least 3 seconds;
to decrease or increase the value until the display shows the required value;
or wait 10 seconds for the automatic storing of set value.
www.combisteel.com
or
will flash on the display;
for more than 2 seconds. The digital display
".
13
Werbung
Inhaltsverzeichnis
