Sanus VMFL1 Bedienungsanleitung Seite 3

Thank you for choosing a Sanus Systems Vision Mount wall mount. The VMFL1 is designed to mount up to 30" LCD flat panel televi-
sions weighing up to 40 lb to a vertical wall. It will allow the television to be just .5" from of the wall.
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified
contractor or contact Sanus at 800.359.5520 or www.sanus.com. Check carefully to make sure that there are no missing or defective
parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged parts. Replace-
ment parts for products purchased through authorized dealers will be shipped directly to you. Never use defective parts. Improper instal-
lation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified by Sanus Systems.
Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please call
Sanus Systems before returning products to the point of purchase.
RequireTools: 3/8 drill bit, phillips screw driver
Supplied Parts and Hardware: Some parts not shown as actual size*
(1) Wall Plate - a*
(2) Lag Bolt - c
(4) M4 x 10 mm Bolt - e
(4) M4 Washer - i
Assembly Instructions for Model: VMFL1
(4) M4 x 20 mm Bolt - f
(4) Small M4 Spacer - j
(1) Monitor Bracket - b*
(4) Dry Wall Anchor - d
(4) M4 x 30 mm Bolt - g
(4) Large M4 Spacer - k
(2) M5 Locking Bolt - h
(2) M5 Spacer - l