Interior Fittings; Handling The Ice Bucket - Bosch KAD-Serie Montage- Und Gebrauchsanleitung

en

Interior fittings

To clean the equipment, all variable parts of the
appliance can be taken out
(~ chapter "Variable interior design").
Note:
To take out and clean the containers, open the doors
fully beyond 90°.
Removing container
Pull out container all the way, lift to detach it from
Ø
the holder and take out.
To insert the drawer, place on the telescopic rails and
push into the appliance. Attach the drawer by pressing
it down.
44

Handling the ice bucket

Removing the ice bucket
For cleaning purposes or if you don't need ice, the ice
bucket can be removed.
2.
Hold at the handle and lift up the ice bucket.
1.
Pull out the ice bucket slowly to prevent damage.
2.
:
Warning
Do not put your fingers, hands or any unsuitable
objects in the ice chute or ice maker. This can cause
personal injury or material damage.
There is a water line connection to the ice maker.
Note:
Do not disassemble the whole water supply system by
yourself. It is recommended to be done by qualified
persons only.
2.
1.
Ice maker cover
Ice chute
Ice bucket