Movement And Storage; Technical Characteristics; Meat Grinder - R.G.V. XTRC 12 I Bedienungsanleitung

9

- Movement and storage

☞
All transport and movement operations should be carried out by
properly informed and trained personnel that must be read and
understood the safety prescriptions reproduced in this manual.
Particularly:
- the movement and / or transport of the machine is to be done only if it is empty and disconnected
from the mains supply,
- check if the lifting means are able to bear the weight and volume of the appliance safely and whether
they are an approved type and subject to regular maintenance,
- take all necessary measures to ensure maximum stability of the centers and loads in relation to their
masses and barycentres,
- avoid the sudden movements of the machine or accidental impact during removal and emptying,
- perform transfers by continuous movements without pulling or repetitive pulses.
10

- Technical characteristics

A

Meat grinder +

grater
Mod. "12"
"22"
40
02_EN.indd 40
C
B
D
A
Meat grinder
Mod. "12"
"22"
"32"
C
B
23/12/14 13:26