Inhaltsverzeichnis
Werbung
4 Fit the cover and turn clockwise to
lock into place
5 Place the power unit onto the
cover.
6 Connect to the power supply and
press down on the speed selector
to select the desired speed. When
operating the power unit, hold it
firmly on the cover and bowl.
G
Press the speed selector lightly to
obtain speed 1.
G
Press the speed selector firmly to
obtain speed 2.
G
Alternatively the speed selector
may be pressed down for short
periods of time to produce a
pulsing action. This can be used to
avoid over processing food.
7 Operate the food chopper until the
desired result is achieved.
8 Reverse the above procedure to
dismantle the unit.
important
G
If preparing food for babies or
young children, always check that
the ingredients are thoroughly
blended before feeding.
G
Do not run the food chopper
continuously for longer than 10
seconds. Leave to cool for 1
minute in between each 10 second
operation.
G
Do not operate the food chopper if
the bowl is empty.
G
Never operate the food chopper
with the bowl filled with liquid.
G
Always allow hot food to cool
before processing.
.
hints
G
If the chopper labours, remove
some of the mixture and continue
processing in several batches,
otherwise you may strain the
motor.
G
Remember that chopping hard
foods such as coffee beans,
spices, chocolate or ice will wear
the knife blades faster.
G
Beware of over processing some
ingredients. Stop and check the
consistency frequently.
G
Various spices such as cloves, dill
and cumin seeds can have an
adverse effect on the plastic of
your food chopper.
G
To ensure even processing, stop
and scrape down any food from
the side of the bowl with a plastic
spatula.
G
The best results are obtained by
chopping small quantities at one
time.
G
Cut larger pieces of food into 1-
2cm pieces. A large load or large
pieces may cause uneven results.
G
Before chopping nuts, herbs,
breadcrumbs etc, ensure that both
the food and the blade, bowl and
cover are thoroughly dry.
4
Werbung
Inhaltsverzeichnis
