SUNTEC Klimatronic DryFix 10 Pure Bedienungsanleitung Seite 17

2. Remove the water tank and empty it.
3. Insert gently the water tank back into the unit
.
Important:
Do not remove the float from the water tank. The water full sensor will no longer be able to
detect the water level correctly without the float; this may cause a water leakage.
If the drainage tank is dirty, please clean it with cold or lukewarm water. Do not use detergent,
scouring sponges, chemically treated dust cloths, gasoline, thinner or other solvents, as these
can damage the tank and cause water leakage.
To install the water tank, please press it firmly into place with both hands. If the tank is not
installed properly, the water tank indicator will be activated and the dehumidifier will not start.
Continuous drainage
The unit is equipped with a continuous drainage port.
Please connect the drain hose to the drainage port. Put the other end of the drain hose into a
proper container.