SUNTEC Klimatronic DryFix 10 Pure Bedienungsanleitung Seite 15

• Please press the buttons
level can be set between 30% and 90% in 5% interval.
• When the ambient humidity is about 2% less than the set humidity level, the compressor
will stop and the ventilator keeps working for further 3 minutes. If the ambient humidity as
high as the set humidity level or higher by 3%, the compressor protection function switches
on; the compressor switches off and turn on again 3 minutes later.
• When the unit is off, please press the button
When the unit is on, please press this button to set the off-time (1-24h).
•
To turn off the timer, please select 0h. The set time will not be changed if the defrosting function
will be activated or if the compressor stops due to full water tank.
Defrosting function
This unit has an automatic defrosting function to protect it in case of low temperatures. For a
detailed description please refer to the operation instructions of DryFix 20 Pure on the
following pages.
DryFix 20 PURE Control panel / Operation instructions
1. Power indicator (green)
2. Timer indicator (orange)
3. Water tank indicator (red)
4. Low fan speed indicator (green)
5. High fan speed indicator (green)
6. Laundry mode indicator (green)
A. On/Off button
B. Timer button
C. Fan speed button
D. Laundry mode button
E. + F. Dehumidifying level setting buttons
Display
• Once the unit is turned on, the display indicates the ambient humidity level.
• Once you have set the desired room humidity, this will be shown on the display.
• Once you have set the on or off time (timer function), the number of hours will be
shown on the display.
• If the ambient humidity level is less than 35%, the display will show "LO".
• If the ambient humidity level is higher than 95%, the display will show "HI".
and to set the desired humidity level. The humidity
several times to set the on-time (1-24h).