SUNTEC Klimatronic DryFix 10 Pure Bedienungsanleitung Seite 14

Attention: The unit should be installed with a minimum distance of 20 cm from the wall or
other obstacles, as they might influence the performance of the unit.
DryFix 10 PURE Control panel / Operation instructions
Display
• Once you have set the desired room humidity, this will be shown on the display.
• Once you have set the on or off time (timer function), the number of hours will be
shown on the display.
• If the ambient humidity level is less than 35%, the display will show "LO".
• If the ambient humidity level is higher than 95%, the display will show "HI".
Operation
•
Connect the unit to the power supply and press the button
The indicating light „POWER" turns green as soon as the unit is plugged in
Indicating lights:
1. Watertank full „WATER FULL"
2. Compressor „COMP"
3. Defrosting „DEFROST"
4. Timer „TIMER"
Buttons:
A: On/Off „POWER"
B: Value decrease „DOWN"
C: Value increase „UP"
D: Timer „TIMER"
to turn the unit on or off.