Cutting And Heading Home - Mowox RM 600 Li BT Originalbetriebsanweisung

• Step 6: On the pop-up message "Save it?", hit the OK key
changes. Or, press
Day
Mon
Tue
Wed
Thu
Fri
Sat
Boundary cut
Your robot follows the boundary wire back to the charging station.
You can decide if it will have its mowing blades turned on. That will make the boundary well
mown.
The factory setting is "
boundary wire.
• Step 1: Move
• Step 2: Move
2018-08-25
08-59-21
• Step 3: Use
• Step 4: On the pop-up message "Save it?", press
you don't want to save the changes, press
Boundary Cut
No
■Yes
6.5 C
UTTING AND HEADING HOME
Push the "Start" key and close the LCD cover to let the robot mower start to work.
Rev 7
to discard your changes.
Set Work Time
Start Hours
02:00 22.0h
02:00 22.0h
02:00 22.0h
02:00 22.0h
02:00 22.0h
02:00 22.0h
No"
, meaning the mower does not cut the grass on its way along the
the cursor to the general setting
the cursor to "Boundary cut" and push
Robot
Mower
Bat
or to move the cursor to "No" or "Yes". Then press
Day
Mon
Tue
Wed
Thu
Fri
Sat
if you want to keep the changes. If
to return to the previous menu.
Save it?
31 (EN)
if you want to keep the
Set Work Time
Start Hours
02:00 22.0h
02:00 22.0h
02:00 22.0h
02:00 22.0h
02:00 22.0h
02:00 22.0h
, push .
.
Set Work Time
■Boundary Cut
WIFI Setting
.