Navigation Inside Corridors; Helix Cutting Mode; Cutting Height Adjustment - Mowox RM 600 Li BT Originalbetriebsanweisung

and the type of fastening. Therefore, any objects you wish to protect within the
boundary, such as a garden pond, trees, furniture or flower beds, m u s t b e
f e n c e d o u t with boundary wire. The wire must form one complete circuit loop.
4.3

NAVIGATION INSIDE CORRIDORS

If you have a corridor inside your lawn, your robot will be able to work on it if it is at least
1.2 meters wide (60 cm between the boundary wires) and max. 8 meters long.
4.4

HELIX CUTTING MODE

If the robotic mower contacted the boundary wire over 5 times, and walked over 1 meter
after the last time, it will go into the helix cut for 3 circles. This helix cutting function
improves the mowing result in the centre area of rather big lawns.
4.5 C
UTTING HEIGHT ADJUSTMENT
The robotic mower has continuous cutting height settings between 20 mm and 60 mm.
Before first use, please cut the grass down to max. 60 mm with a normal lawn mower or
a grass trimmer.
Do not attempt to raise or lower the cut height during cutting.
Rev 7
.
.
12 (EN)