Charging Station - Mowox RM 600 Li BT Originalbetriebsanweisung

wire. The mower may destroy it. That will
stop it functioning.
Cut boundary wire and its
consequential damage are not
subject to warranty.
5.4 C
HARGING STATION
Locating the charging station
Firstly, locate the best position for your charging station, consider the nearest outdoor
electricity socket as this needs to be plugged in (or your robot won't work). Please make
sure it is flat, dry, without magnetic fields and without obstacles in the front of charging
station .
The charging station must be placed on a flat h o r i z o n t a l surface, at ground level, with
2 m straight wire front and 1 m straight wire behind to allow the lawnmower to navigate.
Choose a shadowy spot as the battery prefers to be recharged in a cool place.
This side in the
working area
Leave about 1-meter extra wire, peg the wire along the boundary from the rear side of the
charging station to the foreside. Put the wire down always anti-clockwise. When finishing
the layout to the foreside of the charging station, leave another 1-meter extra wire and
then cut it.
Rev 7
Min. 1 m
Min. 2 m
18
30 cm
(EN)